Meguiar's G200416 Hybrid Ceramic Liquid Wax 09/03/19 Page 1 of 9 Safety Data Sheet Copyright,2019Meguiar's, Inc. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing Meguiar's, Inc. products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from Meguiar's, Inc., and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 40-9208-6 Version Number: 2.00 Issue Date: 09/03/19 Supercedes Date: 08/05/19 SECTION 1: Identification 1.1. Product identifier Meguiar's G200416 Hybrid Ceramic Liquid Wax Product Identification Numbers LB-1100-2782-3, 14-1001-2391-9, 14-1001-3014-6 1.2. Recommended use and restrictions on use Recommended use Automotive 1.3. Supplier?s details MANUFACTURER: Meguiar's, Inc. DIVISION: Meguiar's ADDRESS: 17991 Mitchell South, Irvine, CA 92614, USA Telephone: 949-752-8000 (Fax: 949-752-5784) 1.4. Emergency telephone number CHEMTREC 1-800-424-9300 (24 hours) SECTION 2: Hazard identification The label elements below were prepared in accordance with OSHA Hazard Communication Standard, 29 CFR 1910.1200. This information may be different from the actual product label information for labels regulated by other agencies. 2.1. Hazard classification Not classified as hazardous according to OSHA Hazard Communication Standard, 29 CFR 1910.1200. 2.2. Label elements Signal word Not applicable. Symbols Not applicable. Meguiar's G200416 Hybrid Ceramic Liquid Wax 09/03/19 Page 2 of 9 Pictograms Not applicable. 2.3. Hazards not otherwise classified Repeated exposure may cause skin dryness or cracking. 2% of the mixture consists of ingredients of unknown acute oral toxicity. SECTION 3: Composition/information on ingredients Ingredient C.A.S. No. % by Wt Non-Hazardous Ingredients Mixture 100 SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: No need for first aid is anticipated. Skin Contact: Wash with soap and water. If signs/symptoms develop, get medical attention. Eye Contact: No need for first aid is anticipated. If Swallowed: No need for first aid is anticipated. 4.2. Most important symptoms and effects, both acute and delayed See Section 11.1. Information on toxicological effects. 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media In case of fire: Use a carbon dioxide or dry chemical extinguisher to extinguish. 5.2. Special hazards arising from the substance or mixture Closed containers exposed to heat from fire may build pressure and explode. Hazardous Decomposition or By-Products Substance Condition Formaldehyde During Combustion Carbon monoxide During Combustion Carbon dioxide During Combustion Irritant Vapors or Gases During Combustion Meguiar's G200416 Hybrid Ceramic Liquid Wax 09/03/19 Page 3 of 9 5.3. Special protective actions for fire-fighters Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture. Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. 6.2. Environmental precautions Avoid release to the environment. For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. 6.3. Methods and material for containment and cleaning up Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with detergent and water. Seal the container. Dispose of collected material as soon as possible in accordance with applicable local/regional/national/international regulations. SECTION 7: Handling and storage 7.1. Precautions for safe handling Avoid eye contact. Keep out of reach of children. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid release to the environment. 7.2. Conditions for safe storage including any incompatibilities Store away from acids. Store away from strong bases. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Occupational exposure limits No occupational exposure limit values exist for any of the components listed in Section 3 of this SDS. 8.2. Exposure controls 8.2.1. Engineering controls No engineering controls required. 8.2.2. Personal protective equipment (PPE) Eye/face protection None required. Meguiar's G200416 Hybrid Ceramic Liquid Wax 09/03/19 Page 4 of 9 Skin/hand protection Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective clothing. Gloves made from the following material(s) are recommended: Nitrile Rubber Respiratory protection None required. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Appearance Physical state Color Liquid Off-White Odor Sweet Odor, Pleasant Odor Odor threshold No Data Available pH 8.8 - 9.5 Melting point Not Applicable Boiling Point 212 ?F Flash Point >= 200 ?F [Test Method:Pensky-Martens Closed Cup] Evaporation rate No Data Available Flammability (solid, gas) Not Applicable Flammable Limits(LEL) No Data Available Flammable Limits(UEL) No Data Available Vapor Pressure No Data Available Vapor Density No Data Available Density 0.9 - 1 g/cm3 Specific Gravity 0.9 - 1 [Ref Std:WATER=1] Solubility in Water Moderate Solubility- non-water No Data Available Partition coefficient: n-octanol/ water No Data Available Autoignition temperature No Data Available Decomposition temperature No Data Available Viscosity 6,500 centipoise - 8,500 centipoise Molecular weight No Data Available Volatile Organic Compounds 10.1 % Percent volatile 93 % weight [Test Method:Estimated] VOC Less H2O & Exempt Solvents 625 g/l SECTION 10: Stability and reactivity 10.1. Reactivity This material is considered to be non reactive under normal use conditions. 10.2. Chemical stability Stable. 10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 10.4. Conditions to avoid None known. Meguiar's G200416 Hybrid Ceramic Liquid Wax 09/03/19 Page 5 of 9 10.5. Incompatible materials Strong acids Strong bases 10.6. Hazardous decomposition products Substance Condition None known. Refer to section 5.2 for hazardous decomposition products during combustion. SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole. 11.1. Information on Toxicological effects Signs and Symptoms of Exposure Based on test data and/or information on the components, this material may produce the following health effects: Inhalation: No known health effects. Skin Contact: Prolonged or repeated exposure may cause: Dermal Defatting: Signs/symptoms may include localized redness, itching, drying and cracking of skin. Eye Contact: Contact with the eyes during product use is not expected to result in significant irritation. Ingestion: No known health effects. Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification. Acute Toxicity Name Route Species Value Overall product Inhalation- Vapor(4 hr) No data available; calculated ATE >50 mg/l Overall product Ingestion No data available; calculated ATE >5,000 mg/kg ATE = acute toxicity estimate Skin Corrosion/Irritation For the component/components, either no data are currently available or the data are not sufficient for classification. Serious Eye Damage/Irritation For the component/components, either no data are currently available or the data are not sufficient for classification. Meguiar's G200416 Hybrid Ceramic Liquid Wax 09/03/19 Page 6 of 9 Skin Sensitization For the component/components, either no data are currently available or the data are not sufficient for classification. Respiratory Sensitization For the component/components, either no data are currently available or the data are not sufficient for classification. Germ Cell Mutagenicity For the component/components, either no data are currently available or the data are not sufficient for classification. Carcinogenicity For the component/components, either no data are currently available or the data are not sufficient for classification. Reproductive Toxicity Reproductive and/or Developmental Effects For the component/components, either no data are currently available or the data are not sufficient for classification. Target Organ(s) Specific Target Organ Toxicity - single exposure For the component/components, either no data are currently available or the data are not sufficient for classification. Specific Target Organ Toxicity - repeated exposure For the component/components, either no data are currently available or the data are not sufficient for classification. Aspiration Hazard For the component/components, either no data are currently available or the data are not sufficient for classification. Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components. SECTION 12: Ecological information Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: Disposal considerations 13.1. Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal facilities. Meguiar's G200416 Hybrid Ceramic Liquid Wax 09/03/19 Page 7 of 9 SECTION 14: Transport Information General Transportation Statement: This product does not require classification by DOT, IATA, ICAO or IMDG. Please contact the emergency numbers listed on the first page of the SDS for Transportation Information for this material. SECTION 15: Regulatory information 15.1. US Federal Regulations Contact manufacturer for more information EPCRA 311/312 Hazard Classifications: Physical Hazards Not applicable Health Hazards Hazard Not Otherwise Classified (HNOC) 15.2. State Regulations Contact manufacturer for more information 15.3. Chemical Inventories The components of this product are in compliance with the chemical notification requirements of TSCA. All required components of this product are listed on the active portion of the TSCA Inventory. Contact manufacturer for more information 15.4. International Regulations Contact manufacturer for more information This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: Other information NFPA Hazard Classification Health: 0 Flammability: 1 Instability: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Document Group: 40-9208-6 Version Number: 2.00 Issue Date: 09/03/19 Supercedes Date: 08/05/19 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. Meguiar's, Inc. MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the Meguiar's, Inc. product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a Meguiar's, Inc. product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the Meguiar's, Inc. product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. Meguiar's G200416 Hybrid Ceramic Liquid Wax 09/03/19 Page 8 of 9 Meguiar's, Inc. provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, Meguiar's, Inc. makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from Meguiar's, Inc. Meguiar's, Inc. USA SDSs are available at www.Meguiars.com