SDS Repository

sds

Collection
3M SDS
Description
 
Tags
Search Tag
Filename
06000_Imperial_Hand_Glaze.pdf
Source
 
Full Text
MATERIAL SAFETY DATA SHEET 3M(TM) Imperial(TM) Hand Glaze, P.N. 05989, 05990, 06000, 39007 12/18/2008 _________________________________________________________________________________________________ Page 1 of 8 Material Safety Data Sheet Copyright, 2008, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: 3M(TM) Imperial(TM) Hand Glaze, P.N. 05989, 05990, 06000, 39007 MANUFACTURER: 3M DIVISION: Automotive Aftermarket ADDRESS: 3M Center St. Paul, MN 55144-1000 EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours) Issue Date: 12/18/2008 Supercedes Date: 10/02/2008 Document Group: 10-2861-2 Product Use: Intended Use: Automotive Specific Use: Remove defects from painted surface. SECTION 2: INGREDIENTS Ingredient C.A.S. No. % by Wt WATER 7732-18-5 60 - 90 MEDIUM ALIPHATIC SOLVENT NAPHTHA 64742-88-7 5 - 10 HYDROTREATED HEAVY NAPHTHA (PETROLEUM) 64742-48-9 5 - 10 ALUMINUM SILICATE 66402-68-4 3 - 7 WHITE MINERAL OIL (PETROLEUM) 8042-47-5 3 - 7 GLYCERIN 56-81-5 1 - 5 CASTOR OIL 8001-79-4 1 - 5 SECTION 3: HAZARDS IDENTIFICATION 3.1 EMERGENCY OVERVIEW Odor, Color, Grade: Light orange-brown. Faint sweet odor. General Physical Form: Liquid Immediate health, physical, and environmental hazards: May cause target organ effects. 3.2 POTENTIAL HEALTH EFFECTS MATERIAL SAFETY DATA SHEET 3M(TM) Imperial(TM) Hand Glaze, P.N. 05989, 05990, 06000, 39007 12/18/2008 _________________________________________________________________________________________________ Page 2 of 8 Eye Contact: Mild Eye Irritation: Signs/symptoms may include redness, pain, and tearing. Skin Contact: Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Inhalation: Intentional concentration and inhalation may be harmful or fatal. Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. May be absorbed following inhalation and cause target organ effects. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. May be absorbed following ingestion and cause target organ effects. Target Organ Effects: Prolonged or repeated exposure may cause: Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination, nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness. SECTION 4: FIRST AID MEASURES 4.1 FIRST AID PROCEDURES The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed. Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical attention. Wash contaminated clothing and clean shoes before reuse. Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention. If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Get medical attention. SECTION 5: FIRE FIGHTING MEASURES 5.1 FLAMMABLE PROPERTIES Autoignition temperature No Data Available MATERIAL SAFETY DATA SHEET 3M(TM) Imperial(TM) Hand Glaze, P.N. 05989, 05990, 06000, 39007 12/18/2008 _________________________________________________________________________________________________ Page 3 of 8 Flash Point > 230 ?F [Test Method: Closed Cup] Flammable Limits - LEL No Data Available Flammable Limits - UEL No Data Available 5.2 EXTINGUISHING MEDIA Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide). 5.3 PROTECTION OF FIRE FIGHTERS Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA). Unusual Fire and Explosion Hazards: No unusual fire or explosion hazards are anticipated. Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition information. SECTION 6: ACCIDENTAL RELEASE MEASURES Accidental Release Measures: Refer to other sections of this MSDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. Call 3M-HELPS line (1-800-364-3577) for more information on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode. Contain spill. For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a toxic, corrosivity or flammability hazard. Collect as much of the spilled material as possible. Collect as much of the spilled material as possible using non-sparking tools. Clean up residue with detergent and water. Collect the resulting residue containing solution. Place in a closed container approved for transportation by appropriate authorities. Place in a metal container approved for transportation by appropriate authorities. Dispose of collected material as soon as possible. In the event of a release of this material, the user should determine if the release qualifies as reportable according to local, state, and federal regulations. SECTION 7: HANDLING AND STORAGE 7.1 HANDLING Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Keep away from heat, sparks, open flame, pilot lights and other sources of ignition. No smoking while handling this material. Avoid breathing of vapors, mists or spray. Keep out of the reach of children. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits. If ventilation is not adequate, use respiratory protection equipment. 7.2 STORAGE Store away from acids. Keep container tightly closed. Store away from oxidizing agents. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION MATERIAL SAFETY DATA SHEET 3M(TM) Imperial(TM) Hand Glaze, P.N. 05989, 05990, 06000, 39007 12/18/2008 _________________________________________________________________________________________________ Page 4 of 8 8.1 ENGINEERING CONTROLS Use with appropriate local exhaust ventilation. 8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE) 8.2.1 Eye/Face Protection Avoid eye contact. The following eye protection(s) are recommended: Safety Glasses with side shields. 8.2.2 Skin Protection Not applicable. Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Nitrile Rubber. 8.2.3 Respiratory Protection Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection. Avoid breathing of vapors, mists or spray. 8.2.4 Prevention of Swallowing Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. 8.3 EXPOSURE GUIDELINES Ingredient Authority Type Limit Additional Information GLYCERIN ACGIH TWA, as mist 10 mg/m3 GLYCERIN OSHA TWA, as mist, respirable 5 mg/m3 Table Z-1 GLYCERIN OSHA TWA, Vacated, as mist, total dust 10 mg/m3 GLYCERIN OSHA TWA, as mist, total dust 15 mg/m3 Table Z-1 HYDROTREATED HEAVY NAPHTHA (PETROLEUM) 3M TWA 100 ppm HYDROTREATED HEAVY NAPHTHA (PETROLEUM) CMRG TWA 300 ppm MANGANESE COMPOUNDS OSHA CEIL, as Mn 5 mg/m3 Table Z-1A MANGANESE, INORGANIC COMPOUNDS ACGIH TWA, as Mn 0.2 mg/m3 MEDIUM ALIPHATIC SOLVENT NAPHTHA CMRG TWA 100 ppm OIL MIST, MINERAL ACGIH TWA, as mist 5 mg/m3 OIL MIST, MINERAL ACGIH STEL, as mist 10 mg/m3 OIL MIST, MINERAL OSHA TWA, as mist 5 mg/m3 Table Z-1 WHITE MINERAL OIL (PETROLEUM) CMRG TWA 5 mg/m3 WHITE MINERAL OIL (PETROLEUM) CMRG STEL 10 mg/m3 VAC Vacated PEL:Vacated Permissible Exposure Limits [PEL] are enforced as the OSHA PEL in some states. Check with your local regulatory agency. SOURCE OF EXPOSURE LIMIT DATA: ACGIH: American Conference of Governmental Industrial Hygienists CMRG: Chemical Manufacturer Recommended Guideline OSHA: Occupational Safety and Health Administration AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL) MATERIAL SAFETY DATA SHEET 3M(TM) Imperial(TM) Hand Glaze, P.N. 05989, 05990, 06000, 39007 12/18/2008 _________________________________________________________________________________________________ Page 5 of 8 SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Odor, Color, Grade: Light orange-brown. Faint sweet odor. General Physical Form: Liquid Autoignition temperature No Data Available Flash Point > 230 ?F [Test Method: Closed Cup] Flammable Limits - LEL No Data Available Flammable Limits - UEL No Data Available Boiling point 212 ?F Density 8.2 - 8.4 lb/gal Vapor Density >=1.00 [Ref Std: AIR=1] Vapor Pressure No Data Available Specific Gravity 0.996 [Ref Std: WATER=1] Melting point No Data Available Solubility in Water Moderate Evaporation rate 4.40 [Ref Std: ETHER=1] Volatile Organic Compounds 90 g/l [Details: CONDITIONS: EPA Method 24 / ASTM D2369] Volatile Organic Compounds 0.75 lb/gal [Test Method: calculated SCAQMD rule 443.1] Percent volatile 80 - 90 % VOC Less H2O & Exempt Solvents 350 g/l [Test Method: calculated SCAQMD rule 443.1] VOC Less H2O & Exempt Solvents <= 9.16 % SECTION 10: STABILITY AND REACTIVITY Stability: Stable. Materials and Conditions to Avoid: None known Hazardous Polymerization: Hazardous polymerization will not occur. Hazardous Decomposition or By-Products Substance Condition Carbon monoxide During Combustion Carbon dioxide During Combustion SECTION 11: TOXICOLOGICAL INFORMATION Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components. SECTION 12: ECOLOGICAL INFORMATION MATERIAL SAFETY DATA SHEET 3M(TM) Imperial(TM) Hand Glaze, P.N. 05989, 05990, 06000, 39007 12/18/2008 _________________________________________________________________________________________________ Page 6 of 8 ECOTOXICOLOGICAL INFORMATION Not determined. CHEMICAL FATE INFORMATION Not determined. SECTION 13: DISPOSAL CONSIDERATIONS Waste Disposal Method: Incinerate in an industrial or commercial facility in the presence of a combustible material. As a disposal alternative, dispose of waste product in a facility permitted to accept chemical waste. EPA Hazardous Waste Number (RCRA): Not regulated Since regulations vary, consult applicable regulations or authorities before disposal. SECTION 14:TRANSPORT INFORMATION ID Number(s): 60-4300-5014-0, 60-4300-5015-7, 60-9800-1528-7 Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this material. SECTION 15: REGULATORY INFORMATION US FEDERAL REGULATIONS Contact 3M for more information. 311/312 Hazard Categories: Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - No STATE REGULATIONS Contact 3M for more information. CHEMICAL INVENTORIES The components of this product are in compliance with the chemical notification requirements of TSCA. All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS), or are exempt polymers whose monomers are listed on EINECS. MATERIAL SAFETY DATA SHEET 3M(TM) Imperial(TM) Hand Glaze, P.N. 05989, 05990, 06000, 39007 12/18/2008 _________________________________________________________________________________________________ Page 7 of 8 All the components of this product are listed on China's Inventory of Chemical Substances. Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information. This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: OTHER INFORMATION NFPA Hazard Classification Health: 1 Flammability: 1 Reactivity: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. HMIS Hazard Classification Health: 1 Flammability: 1 Reactivity: 0 Protection: X - See PPE section. Hazardous Material Identification System (HMIS(r)) hazard ratings are designed to inform employees of chemical hazards in the workplace. These ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use in emergency situations. HMIS(r) ratings are to be used with a fully implemented HMIS(r) program. HMIS(r) is a registered mark of the National Paint and Coatings Association (NPCA). Revision Changes: Not Applicable DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M. 3M MSDSs are available at www.3M.com MATERIAL SAFETY DATA SHEET 3M(TM) Imperial(TM) Hand Glaze, P.N. 05989, 05990, 06000, 39007 12/18/2008 _________________________________________________________________________________________________ Page 8 of 8