SDS Repository

sds

Collection
Lucas Oil/Power Service
Description
 
Tags
Search Tag
Filename
10211_Syn-SAE_0W-40_MSDS.pdf
Source
 
Full Text
Material Safety Data Sheet SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Product Name: Lucas Synthetic SAE 0W-40 Motor Oil Product Description: Base Oil and Additives Product Number: 10210, 10211, 10212, 10213, 10214, 10215, 10327 Intended Use: Engine Oil COMPANY IDENTIFICATION Supplier: Lucas Oil Products Inc. Phone #: 1 (800) 342-2512 302 North Sheridan St. Corona, CA. 92880 USA SECTION 2 COMPOSITION / INFORMATION ON INGREDIENTS No Reportable Hazardous Substance(s) or Complex Substance(s). Name CAS# Concentration* Distillate, Severely Hydrotreated Heavy Paraffinic 64745-54-7 40-50% SECTION 3 HAZARDS IDENTIFICATION This material is not considered to be hazardous according to regulatory guidelines. POTENTIAL HEALTH EFFECTS Low order of toxicity. Excessive exposure may result in eye, skin, or respiratory irritation. NFPA Hazard ID: Health: 1 Flammability: 1 Reactivity: 0 HMIS Hazard ID: Health: 1 Flammability: 1 Reactivity: 0 SECTION 4 FIRST AID MEASURES INHALATION Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention. SKIN CONTACT Wash skin with mild soap and water for 15 minutes while removing contaminated clothing. EYE CONTACT Flush thoroughly with water for at least 15 minutes. If irritation occurs, seek medical attention. INGESTION Do not induce vomiting. If conscious give milk or water and seek medical attention. SECTION 5 FIRE FIGHTING MEASURES EXTINGUISHING MEDIA Appropriate Extinguishing Media: Use dry chemical, carbon dioxide, halon, or foam to extinguish flames. Inappropriate Extinguishing Media: Straight streams of water. FLAMMABILITY PROPERTIES Flash Point: >450oF SECTION 6 ACCIDENTAL RELEASE MEASURES SPILL MANAGEMENT Land Spill: Stop source of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land. ENVIRONMENTAL PRECAUTIONS Prevent entry into waterways, drains or sewers. SECTION 7 HANDLING AND STORAGE HANDLING Keep container tightly closed. Eating, drinking and smoking should be prohibited in areas where this material is handled. Wash hands and face before eating. STORAGE Store in a cool well ventilated place, away from heat and/or incompatible materials. SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION ENGINEERING CONTROLS: No special requirements under ordinary conditions of use and with adequate ventilation. PERSONAL PROTECTION Personal protective equipment selections vary based on potential exposure conditions such as applications, handling practices, concentration and ventilation. Information on the selection of protective equipment for use with this material, as provided below, is based upon intended, normal usage. Respiratory Protection: No special requirements under ordinary conditions of use and with adequate ventilation. Hand Protection: No protection is ordinarily required under normal conditions of use. Eye Protection: If contact is likely, safety glasses with side shields are recommended. Skin and Body Protection: No skin protection is ordinarily required under normal conditions of use. Ingredient Exposure Limits Paraffinic Oil ACGIH TLV (TWA: 5 mg/m3 8 hours) ? United States Canada (Ingredient) TWA: 5 mg/m3 8 hours, STEL: 10 mg/m3 8 hours SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES Typical physical and chemical properties are given below. Consult the Supplier in Section 1 for additional data. GENERAL INFORMATION Physical State: Liquid Color: Light Brown Odor: Characteristic petroleum Density: 7.16 pounds/gallon Flash Point: 460oF Autoignition Temperature: N/D Boiling Point: >500oF pH: N/D Solubility in Water: Negligible @ 25oC Viscosity cSt at 100oC: Greater than or equal to: 15.0 SECTION 10 STABILITY AND REACTIVITY STABILITY: Material is stable under normal conditions. CONDITIONS TO AVOID: Excessive heat. MATERIALS TO AVOID: Strong oxidizers HAZARDOUS DECOMPOSITION PRODUCTS: Material does not decompose at ambient temperatures. SECTION 11 TOXICOLOGICAL INFORMATION Acute Toxicity: Product/Ingredient Name Result Species Dosage Paraffinic Oil LD 50 Dermal Rabbit >5g/kg LD 50 Oral Rat >5 g/kg LD 50 Inhalation Rat > 5mg/Liter Carcinogenicity, Mutagenicity, Teratogenicity and Reproductive Toxicity: No data No known significant effects or critical hazards. SECTION 12 ECOLOGICAL INFORMATION Aquatic Ecotoxicity: None. Not readily biodegradable SECTION 13 DISPOSAL CONSIDERATIONS Disposal must be in accordance with current applicable regional, national and local laws and regulations. SECTION 14 TRANSPORT INFORMATION DOT: Not Regulated TDG: Not Regulated Mexico: Not Regulated ADR/RID Class: Not Regulated IMDG: Not Regulated IATA-DGR Class: Not Regulated SECTION 15 REGULATORY INFORMATION OSHA HAZARD COMMUNICATION STANDARD: When used for its intended purposes, this material is not classified as hazardous. HCS Classification: Not Regulated TSCA 8(a) PAIR: Not determined TSCA 8(a) IUR Exempt/Partial exemption: Not determined U.S. TSCA: All components listed SARA 302/304/311/312/313: SARA 313 (Zinc Compounds) Clean Water Act: (CWA) 307: Not Regulated CERCLA RQ ? 40 CFR 302.4: None Name CAS# Concentration* Distillate, Severely Hydrotreated Heavy Paraffinic 64745-54-7 40-50% SECTION 16 OTHER INFORMATION N/D Original Date: 12-23-04 Updated: 12-6-11 We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.